Sunday, January 18th, 2009
I hope you forgive me for typing this post with dirty hands. I just got finished cleaning out the St. Croix Prescott EXL pellet stove.
Actually, I gave it more than a regular cleaning, I gave it more like one of those seasonal cleanings that everyone says you should do, but no one does. I even took some pictures.
The reason for this post is really to follow up from a comment left by “Linda” over at my original pellet stove post.
Apparently, many fine pellet stove owners out there are having issues with their #2 light blinking. I received tons of great comments on my other post regarding this. We have all been looking for the answer. Linda offered a lot of insight, so I decided to give her ideas a try. I think the main point of her comment was to say that cleaning out behind the “ash clean out covers” is very important. I thought I had been doing that, but she mentioned that what I was doing, wasn’t enough.
Okay, so let’s get going. I am going to show you some pretty interesting photos in this post…photos that are hard to find. Sure, there are tons of good pellet stove shots out there, but usually when people start cleaning out their stoves, they forget all about the camera. Not me, my friends. Not me.
I first went downstairs and shut the stove down. When it cooled itself and shut all the way down, I unplugged it. That’s very important, so make sure you do it. After that, I gave it a quick once over to make sure there were no large piles of ash anywhere. I didn’t give it a good cleaning, because I just did that yesterday. It didn’t need to be done again. I did push some ash into the ash pan and empty it though.
What I want to show you here are those ash clean outs that the owner’s manual talks about so much. I just realized this morning that there are about 4 warnings to keep these things clean. I guess it’s pretty critical. I have been doing this every time I clean the stove, so I really didn’t think I needed to do it again. Linda mentioned that we should be cleaning these out with a bottle brush or something like that to really clean them well. Good thing I had bought one of the bottle brushes from Lowe’s a while back. It’s really made for a fireplace or stove, but I was using it to clean bottles for my home brew.
-
-
Left pellet stove clean out cover – closed
-
-
Left pellet stove clean out – open
-
-
Cleaning the pellet stove clean out with a bottle brush – straight up
-
-
Pushing bottle brush into pellet stove clean out – towards center
-
-
Right pellet stove clean out with ash showing
-
-
St. Croix Prescott EXL exhaust fan
-
-
Fan blades of a pellet stove exhaust fan
-
-
St. Croix Prescott pellet stove exhaust vent
Notice how there really isn’t too much ash in there? I’m talking about inside the hole. I just vacuumed this out yesterday, but I can imagine what it would look like if someone never cleaned these out. Probably like a packed wall of ash.
I didn’t take pictures of the right side, because it is identical to the left side.
By pushing the brush straight up, I didn’t get all that much ash to come out. There really wasn’t all that much up there. By pushing it sideways, I got a little bit more. I’ll show you in the next photo.
To get the pile of ash in the photo above, I basically pushed the bottle brush straight through, from the left side to the right side. I actually saw the brush coming through the right side.
I figured that was done, since I saw all that ash coming out. I decided to move on to clean out the exhaust fan. This is one of those things the book tells you to call the dealer for. It took me about 15 minutes to do the whole job, so it’s up to you.
To remove the fan, I took off the 6 nuts that surround the motor. I believe I used a 9mm 6-point tall socket. I also removed the vacuum hose and took off the vacuum switch wires as well as the fan wires. After everything was removed, the motor and fan popped right out.
With the fan in hand, it was easy to clean the blades (if you call them that). You can use an old paint brush or a rag or something like that. Just get the ash off the blades. The owner’s manual says this fan does not require oiling.
I also decided to take a photo of the rear part of the exhaust vent. This is one of those things we always wonder about, but unless you have taken a pellet stove apart, you will most likely will never see.
As you can see, there wasn’t really too much ash buildup on either the fan or the exhaust vent. I brushed them off and put everything back together. I lit the stove up and watched it burn for a while. I haven’t yet put the wires back on the vacuum switch. I still have them jumped. I’m not sure I have the heart to go through that again, since the stove has been running so wonderfully the way I have it now.
Questions, comments, concerns?
Related posts
Monday, January 12th, 2009
Do you have any idea how difficult it is to purchase a humidifier? Well, it’s not hard to purchase one, the difficulty lies in going over all the different selections online. Oh, and the reviews…THE REVIEWS. If there were no online reviews, things would be a heck of a lot easier. Trying to decifer between the real ones, the fake ones, the ones placed by the company itself and the ones placed by its competitors…it’s simply exhausting.
Okay, here is what has been happening: Lately, I have been finding it more challenging to feel the heat the pellet stove has been producing. It’s like I have to keep cranking it up more and more, just to get what we used to get out of it. The unit is running fine and is blowing out hot air, but I am finding myself getting cold easier and faster.
I know it’s colder outside than it has been, but that isn’t causing my little, “can’t get warm inside” dilemma. The temperature indoors has been remaining virtually the same as it has been over the past few weeks. I had a feeling I knew what the problem was, so I acted.
I did a little reading online and found that dryer air is more difficult to heat (or to feel the heat in). If moisture is added, the air feels warmer. If you know anything about this and I am sound strange, please correct me. I am merely a novice consumer and am always looking for more information on this type of stuff.
As a matter of fact, dry winter air does more than make you feel cold, it causes chapped lips, itchy skin and frequent nose bleeds. I also read somewhere that it dries out the wood in your house. That’s good enough reason for me to get going with the moisture. Oh yeah, one more thing…that good ol’ static. Can’t forget about that.
After getting all sorts of discouraged from looking at humidifiers online, I decided to go to Home Depot, close my eyes and grab one off the shelf. Good thing I grabbed the best one there.
For the uninitiated, there are all sorts of humidifiers; warm mist, cool mist and everything in between. Some cool mist humidifiers have spinners on the inside and shoot water in the air, otherwise known as vaporizing the water (vaporizers). Other cool mist humidifiers use “wicks” or filters to absorb the water in the holding tank. The fan in the unit basically evaporates the water from the wick. I really don’t like either of these types of humidifiers because I have had them both. The vaporizers leave “white dust” from the minerals in the water all over the place and the wick humidifiers have to have their filters changed relatively frequently. They get cruddy quite fast. The last type of cool mist humidifier I know of is the ionic mist humidifier. I have no idea how these work, but I do know many people are happy with this type and they cost more. That’s about it.
I favor the warm mist humidifiers. Simply put, these humidifiers boil the water and steam it out of the top of the unit. Some people don’t like these types of units because they cost more to run by using more electricity and leave the mineral trace in the unit, which requires cleaning every so often. Personally, I think that these types of humidifiers are the less of four evils, so I got one. If someone has other suggestions for me, I welcome them, because we will most likely need another unit.
I picked up the Honeywell HWM-450 4 Gallon Humidifier. The box says it can put four gallons of moisture in the air per day, which I found satisfactory. I was tempted to get the 14 gallon per day humidifier, but then again, my bubble was burst by looking at the $20 box of filters (or wicks) I would have to buy every few weeks. Here are some photos and a video of the unit I purchased today:
Honeywell HWM-450 4 Gallon Humidifier
Honeywell HWM-450 4 Gallon Humidifier
Honeywell HWM-450 4 Gallon Humidifier
After I brought this unit back to the house and ran it for a while, I decided to search for what people were saying about it online. I found one website where they had five reviews. Some people loved it, some people hated it. So far, I really like it, but then I have only had it for about three hours.
It does push a lot of moisture out into the air. The only way I figured I could show you, is to take a video of it in action. I know that I would have watched this video before I made the purchase, so maybe there are a few folks out there who would appreciate this like I would have.
Related posts
Monday, November 24th, 2008
As I mentioned earlier in the season, we had a St. Croix Prescott EXL pellet stove installed in the basement.
Before the Winter season really began, I had my doubts on whether or not the pellet stove would heat the entire house. I was worried that it’s location would hinder the airflow to all the rooms upstairs. Well, I am happy to inform you that the stove does heat the entire house. I mean, if we keep the master bedroom door shut, it does. The master bedroom is over the garage and the furthest room from the stove. It’s also the coldest room, which is why we keep the door shut. When the time hits 10:30PM, the new digital thermostat cranks the heat in that room up to 65 degrees. That’s good enough for me.
We have had some nights already where the temperature has been in the 20s. I think that’s Winter and enough to tell me that the heating situation is going to be okay. I did try burning a fire in the regular fireplace a few times while running the pellet stove. The fireplace actually made things worse. It sucked so much air out of the house, all the rooms dropped a few degrees. Fireplaces are remarkably inefficient and really shouldn’t be used, in my humble opinion. If you want to run something in your fireplace, run a free standing wood stove or a wood stove insert. Even burning a fireplace for aesthetics on a cold day will freeze out the rest of your house. Nuff said.
Okay, we are having a little issue with the pellet stove.
A few nights ago, I tried to start it up. The start up procedure really isn’t very difficult on the Prescott. It basically consists of pushing the “on” button. Once the “on” button is pushed, the room blower turns on for about 10 seconds and the auger turns until the burn pot is approximately half way full of pellets. As the auger is turning, the ignitor kicks on and the pellets light up. It’s fun to watch and I sit there almost every time I light the stove doing just that. I smile when I see that flame dancing around inside that pellet stove.
Back to a few nights ago…when I tried to light the stove this particular time, I pushed the button. The fan turned on for about 10 seconds and then the stove just shut off. I am not sure if the auger ever turned to drop pellets into the burn pot.
I tried to light the stove a few more times when I noticed the #2 light blinking on the control board. I thought this was a little strange, since I had never seen that light blink before. I pulled out the owner’s manual and looked up that error code. Apparently, a lack of negative pressure causes the stove not to light and the #2 light to blink.
What can cause a lack of negative pressure? Well, a really windy day can do it, an open pellet stove door, a fireplace burning upstairs perhaps, a clogged air feed pipe or a clogged exhaust vent pipe. I am sure there are others, but these are the ones I remember.
Since I had a fire already going upstairs in the fireplace, I chalked the whole thing up to that. I got the pellet stove going in this instance by pulling the rubber tube off the vacuum switch and lightly sucking on it. When I heard a little “click,” I pushed the on button again. From here, things were fine. I held the crimped hose for a few minutes and then I hooked it back up the proper way.
Well, I tried to light the stove again the next night. The same thing happened. Since we had no fire going in the fireplace, I thought perhaps there was a clogged area in the stove somewhere that is causing the lack of vacuum, or negative pressure.
Let’s make a really long and boring story a bit shorter and to the point.
I cleaned out the entire stove about 10 times and nothing has changed. Every night, I suck on that hose to get the stove up and running. I have been reading the owner’s manual as well as some websites that deal with this kind of situation, but nothing has helped. One website said that a clogged exhaust vent is the sure-fire problem. I got excited and took off the clean-out cap. A little pile of ashed dropped out, but nothing changed.
This afternoon, I called the pellet stove dealer. I told them that I had pretty much narrowed the problem down to a faulty pellet stove vacuum switch and that I would need the tech to come out and take a look. Before we swap out the switch, I want him to hook up a vacuum gauge to see if there is proper negative pressure. If there is, we can replace the switch…if not, we have to do a bit more digging.
I keep going downstairs to investigate this issue. It is in my blood that I try to diagnose this problem myself. The only things I don’t have are a vacuum gauge or a new vacuum switch. I guess I need those things to solve the problem.
If you have ever experienced something like this with your pellet stove, please let me know. I am racing against time here. I want to beat the repair guy and figure this out myself.
Related posts
Wednesday, September 24th, 2008
The pellets were delivered yesterday, all four tons of them. That’s 8,000 pounds.
What did I do with all 8,000 pounds of pellets? I moved all 8,000 pounds of pellets downstairs, alone. I did that all by myself in about an hour and a half. I don’t mean to brag about my feats of strength, I really don’t.
This feat was really nothing for me, moving all 8,000 pounds of pellets, I mean. It was annoying, because the wheelbarrow had a tire that was half flat and it was dark outside, but otherwise, everything was OK. I also had to navigate through the little doggy land mines, but I mostly made it.
Wood pellets by the ton
I put between 7 and 8 bags of pellets in each wheelbarrow load. At times, things got a little hairy going down the slight hill into the backyard, but again, this was but a minor challenge. When you have as much training in this type of thing as I do, it’s really simple.
Can someone please pat me on the back?
Of course I had to get a fire going in the pellet stove last night. The stove works really great, but I have to seal up the pipes again, just like the old stove. They leak slightly, which kind of stinks. I’ll get it.
The cool part is that when I am standing on the stairs between the basement and the main floor, I can feel a breeze going down, when I put my hand down towards the stairs and a breeze going up, when I put my hand up near the ceiling.
I think it’s going to work out just fine.
Related posts
Monday, September 22nd, 2008
First of all, let me just tell you how much I hate the word “obsolete.” I hate it almost as much as I hate the words “green” and “organic.” Gee, how much can we overuse these words? I didn’t use one of my lights today, therefore I am running a “green” company. Hmmm.
Basically, everything is obsolete these days. I mean, is my car obsolete just because there is something better out there? Is my telephone obsolete just because there is a new model? Ok, I’m sorry. I don’t want this blog post to sound like a rant, even though I can rant with the best of ‘em.
I was in the pellet stove place the other day waiting to talk to someone about when my pellets can be delivered. Remember, they aren’t answering their phones? By the way, the delivery was scheduled for today, but no one showed up. Basically, the day was spent working and looking out the window. I might stop by to visit them again tomorrow to see what they have to say about this.
Anyway, while I was there pretending to look at some stoves, I noticed a sales guy walking by. He asked if he could help me when I said yes. I asked him what the little door in the floor of the fireplace is and what it is used for. He replied, “Well fireplaces are basically obsolete…everyone is getting inserts.” I felt like saying, “Look you little pissant, I didn’t ask you whether or not fireplaces are obsolete. I asked what the little door was.” But, me being me, I didn’t way that. I just kept my charming smile and got an answer after he tried to sell me an insert.
Just in case you wanted to know what the little door in the floor of a fireplace is, it’s a clean out. Instead of shoveling the ashes out of the fireplace, you can just open the door and push them down into the hole. Then, you can go downstairs and shovel the ashes out down there.
I think the word obsolete is obsolete. So there.
Related posts
Sunday, September 21st, 2008
I keep trying to tell anyone who will listen that they should get into the wood pellet selling business. I mean it. If you want to get into a “carbon-neutral” business, start selling wood pellets.
The demand for wood pellets has been rising like absolute craziness. There are no licenses and no classes to take. All you need to do is get a truck, find a vendor, put an ad in the Yellow Pages, get a garage and start making money. It’s pretty much a year round business now. You’re crazy…CRAZY if you don’t listen to me on this one.
I visited a website the other day checking out all different brands of wood pellets. This place sold and delivered to the entire state of Connecticut. They prided themselves on having the most diverse and best quality wood pellets in the state. Well, when I got to the order page, guess what? Every single brand of wood pellet was sold out. Even the pellet stove store I bought this pellet stove from stopped answering their phone. Now, you have to leave a message and they will get back to you. I had to stop by in person yesterday just to speak with them.
I am not sure about the margins for selling woods pellets, but I would guess they are flexible. You could probably make up for a lot in delivery charges, but I would expect the rest is pretty easy. Just think about it…if there were blogs back when people started delivering heating oil, you might have seen a similar post.
I swear, if someone doesn’t start doing this, I will.
Related posts
Saturday, September 20th, 2008
I know it’s hard to believe, but sometimes, I sit here and think of stuff to write and come up short.
I hear this a lot with blogs…writer’s block. I never thought I would have it. I’m not sure I do, I am really just not in the mood sometimes. I don’t think life is any more boring right now, but it just doesn’t seem like there is anything to talk about. I guess I will just talk about current events.
Ok, I have been playing a lot of tennis. I went to another clinic today and had a good time. The last clinic I went to didn’t go over so well. I think I was hitting too softly. Today, I really nailed the ball good and had a good time. I don’t know what I like more, the game of tennis or striking something really hard. Either way, it’s good exercise and my body is ripped and buff. My aches and pains are even going away. All my strokes are coming along nicely. All I have to do is get my serve semi-consistent and I think I am going to get more involved with playing real matches.
I did win a game today. I lost two right before it, but I did win.
The weather is changing in the Northeast. It has been getting chilly at night and I haven’t been sweating bullets during the day. I even mowed the lawn today and didn’t sweat a drop. I won’t mention that I was on the ride-on lawnmower. I won’t mention that. I am going to start taking the camera out more to get some nice Autumn shots. Also, we can drive places again now that the humidity is gone. See, there are some photo opportunities right there.
The neighbor from up the road stopped by today to introduce herself and give us a big bouquet of Mums. I thought this was very nice. It was a really classy thing to do.
I have had the fireplace going for the past three nights. It doesn’t really do anything, besides look good. To get any heat out of it, I think I really have to pile the logs on. That might happen further in the season when the weather is cold during the day, but not yet.
I tried the pellet stove out today just for kicks. It works great. I went to the top of the basement stairs to see if I would feel the heat rising, and I felt a breeze. I actually felt a breeze, which means that the air was moving all by itself and I don’t need a fan to do it. That’s a good thing. I am curious how the pellet stove is going to heat the house. I am not expecting to have the whole house heated, but a few big rooms would be nice.
Also, after I finished playing tennis this morning, I went over to the pellet stove store and scheduled the delivery of pellets. They are going to drop off all four tons on Monday. Anyone want to come over and help me move four tons of pellets? Yeah, that should be a riot. Ah, it’s only 200 bags. That’s nothing. You bet I am going to be taking pictures of that one.
Still using the Bowflex and am stronger than ever. I think my stomach had gotten flatter. I like that because sitting in a computer chair all day doesn’t work wonders for the body.
Ummm, what else? I don’t know. September just seems kind of slow, doesn’t it? I mean, there is a lot of stuff going on, but the wheels of commerce don’t seem to be turning as fast this month. I wonder if this is the way it’s going to be until December. I keep trying to think back to the way it was last year. I thought things picked up in September, but maybe not.
I have been working a lot, trying to get things to launch in a big way. I have a little goal that is, well, not so little. I am laying the groundwork for the whole thing right now. It’s a bit difficult because there are so many options for things and so much to learn. If I could just get past a few hurdles, I could really move things forward. We’ll see what happens.
Ok, enough of this “not writing.” I guess I did have something to write about after all. The only problem is that there were no pictures. Sorry Mom.
Related posts
Thursday, September 11th, 2008
It was a bit chilly last night at around 50 degrees. It wasn’t chilly enough to make a fire, but I did anyway. I wanted to see how everything worked. I mean, I know how everything works, I just wanted to see it in action.
I made a fire with some fairly green wood I took out of the woods a few weeks ago. It was a little smokey and hissed, while the moisture evaporated out of the ends of the logs. I know that kind of wood isn’t meant to be burned, but it had to be done.
After a while, the fire got going pretty good…
Fire in fireplace
I am not sure how much heat this fireplace is going to produce this Winter. From what I have been reading, not much. Fireplaces aren’t too efficient. I guess the issue is that when the fire goes out, all the heat in the house goes right up the chimney. This fireplace does have glass doors though, so I can close them before we go to sleep, stopping some of the heat from escaping the house.
I really want the Hampton Wood Insert HI300. This wood burning stove insert has a nice, glossy baked on enamel so it looks really good. It has a BTU of 75,000, an efficiency of 77%, can handle a log size of 18″ and has a burn time of 8 hours. Also, this wood stove has an optional blower, so you can really pump up the heat.
I hate the fact that I have been thinking about this wood stove so much, because that means I am most likely going to get it. I just want to get into the season a bit to see how the pellet stove does.
I like the idea of having both a pellet stove and a wood stove.
Related posts
Wednesday, August 27th, 2008
The town inspector came by today to inspect the freshly installed pellet stove. It passed, but with a little story.
When the inspector was reading through the manufacturer’s installation manual, he couldn’t find the part that said exhaust vent clearances only need to be 9″ from windows and doors if a fresh air vent is used. The reason he couldn’t find it is because it wasn’t in there. When I realized this, I began to sweat. Then, I remembered that the updated version of the installation manual was online…that’s where I got those clearances from. I quickly went upstairs to print out the pages I kept telling him about. I ran back downstairs and gave him the paperwork. He approved the install with no more issues.
I really like this installation because we don’t need a protective layer between the stove and the floor, since it’s on the new basement tile. That’s pretty cool, as well as a money saver. Also, we used hardly any exhaust pipe. That’s another money saver.
After the inspection, I called the pellet stove place to complete the order for four tons of pellets. I wanted to make sure the stove would be operable before finishing and paying for the order. They will get delivered in mid September.
I also called the insurance company to inform them of the new appliance. They liked this and added $11 to the homeowner’s policy. Not bad…
On the way home from Home Depot today, I saw a sign that offered a cord of wood for $200. Boy, prices have gone up. Even pellets were about $2.50 a bag a few years ago. Now, they are averaging about $5 per bag. If you were ever thinking about getting into a new business, alternative energy is it. This stuff is HOT right now.
Related posts
Tuesday, August 26th, 2008
Well, the guys came over yesterday to install the new St. Croix Prescott EXL pellet stove. As you might recall, our previous pellet stove was a Harman P38. I was a little nervous about switching brands because I had gotten used to Harman. Also, Harman has very good reviews. The reason I couldn’t get a Harman this time is because they are all backed up and we may not have even gotten one this season.
It took the installers about 3 hours to finish the installation. When everything was in, they fired it up to make sure everything was working properly. One of the installers noticed one issue…the auger wasn’t turning, so no pellets were falling into the burn pot. the auger motor was working fine, just not the auger itself. We made an appointment for the service guy to come out today. By the way, I could have fixed this. It was easy. I actually was almost done fixing it when the doorbell rang. That’s me beating my chest.
Today, the repair guy came out and fixed the auger issue. The small set screw on the auger shaft wasn’t tightened properly, so it wasn’t catching on the auger motor.
I must say, this unit is very nice. It has auto-light, which was very important. I am going to hook up a thermostat, so the pellet stove can shut down and start up on its own. Also, the auger and fan is much quieter than the Harman. The whole system just seems to be more elegant. For a few hundred bucks more, I am happy that I went with this model.
Here are some photos…
St. Croix Prescott EXL pellet stove
St. Croix Prescott EXL pellet stove control panel
St. Croix Prescott EXL pellet stove inside venting
St. Croix Prescott EXL pellet stove outside venting
What’s nice is that the outside venting is under the porch. The necessary clearances are 24″ away from the porch and 12″ off the ground. Also, since we used the fresh air kit, the clearances from windows and doors is only 9″. I would say that’s one of the huge benefits of pellet stoves.
Related posts
