Monday, September 7th, 2009
I have always wanted an under sink water filter. I’m not sure why, especially since we have a whole house filter. I guess it’s because the whole house filter is all the way down in the basement and I keep thinking the water gets all screwed up traveling through the pipes. I like the idea of having a filter close to the tap.
I decided that I had the capabilities to install an under sink water filter myself. I mean, I do have the brains and the patience. It’s not really a hard job, just one that you have to psych yourself into doing because you have to clean out under the sink. You know…all those bottles of who knows what and cans of what the heck it this. Throw in a few old sponges and there you have it – the area below a kitchen sink.
There was one little issue that was in the way of me installing a water filter. The faucet we had installed on the kitchen sink was a bit out dated. It was one of those “one handle” ones that sits right in the middle. Some people prefer that style, but I always liked the two handle ones. In this case, the two handles are preferred because the water filter only runs on the cold line. I like knowing that when I turn on the cold water, only the cold water is running. So, I basically needed a water filter and a new kitchen faucet. Not a problem, I’m really cheap when it comes to kitchen faucets and the filter setup was only $34. It even came with the insert.
Off to Lowe’s I went. When I got there, I strolled down the filter aisle and picked out a “Whirlpool Drop in Filtration System – WHKF-DUF.” This is the $34 jobber I just told you about. I knew what to expect because I already picked it out online. I put the filter in the cart and went over to the next aisle that had all the faucets. There they were, all lined up on the wall. I knew I wanted the chrome Peerless for around $44, but I was forced to get the $68 model because we have a four hole sink. That means that we have that extra little sprayer. You know, the one that you can wrap a rubber band around and sit back in its holder. When someone comes by to turn on the sink, they get sprayed. Yeah, that one.
I picked up the model I needed and put it in my cart. Or what I thought was my cart.
Here’s a funny little story. When I rolled my cart into the faucet aisle, I saw a nice family standing there trying to pick out a kitchen faucet. I noticed that they were kind of just randomly picking things out and didn’t know why. There are differentiating factors in faucets such as the one handle or two that I spoke of above. Also, there is the height of the faucet end. Our old faucet was low, so when I tried to get a large pot filled with water, I had to angle it such a way. Anyway, I broke the ice by saying, “Boy, I feel like I’m part of the family.” They laughed and I laughed. The father just looked at me. There were three of them…the mother, the father and the daughter. Okay, on with the story. I told them about the height issue and why and they were just amazed. As far as I was concerned, they thought I was the cat’s meow. I left the aisle to go out to the garden center.
When I got out to the garden center, I picked out two trees and put them into the cart. I stood back and looked at the faucet. Then, I wondered where the filter was. For the first time in my life, I grabbed the wrong cart. I think it was the faucet aisle family’s cart that I had taken. I left the cart outside in the garden area (because I already had the trees in it) and walked back into the faucet aisle. There it was, my cart with the filter in it. I felt bad for the poor family that had to walk away with no cart, carrying the faucet in their hands. They probably thought I was just fluffing them up earlier so I could steal their cart.
Okay, story time is over. Here are some pictures of the kitchen faucet and under sink water filter installation.
-
-
Under kitchen sink looking up at botton of old faucet
-
-
Under kitchen sink looking at hot and cold plumbing pipes
-
-
Top of sink with old faucet removed
-
-
Under sink with old faucet removed
-
-
New Peerless kitchen faucet installed
-
-
Whirlpool under sink water filter installed
-
-
Peerless kitchen faucet box
-
-
Peerless kitchen faucet model P99587-D
-
-
Whirlpool under sink water model WHKF-DUF
Everything works great and the installation took me about an hour and a half.
I have always wondered why there is such a big price difference between faucets, and doorknobs for that matter. Either I have never used a really high quality faucet or doorknob or I am just missing something. Every time I go shopping for either, I always get the cheapest available and find that they work just great. Maybe I am missing something. Perhaps someone can enlighten me.
Related posts
Monday, September 7th, 2009
This is a project that I have been waiting all year to do. It’s called, “Overseeding the lawn” (the correct time of year).
Every time I have put down grass seed, it was during the hottest, driest time of year. The seed didn’t do much because there was nothing much to do. Eventually, I think it actually grew, but that was months later when things cooled off and the rain returned.
They say to overseed your lawn in early September. This is because, like I said above, the Summertime drought is most likely over and rain falls more frequently. Unfortunately for me, the ten day forecast shows ten perfectly orange pictures of sunshine. Only me.
The reason I did the whole lawn dethatch, aerate and overseed the day I did was because of the rain we got the previous two days. In order to properly aerate, you need moist soil. If the soil is too dry, the aerator can’t get down into the dirt deep enough and you won’t pull a substantial plug. I got plugs that were about one and a half to two inches long. I would offer a picture, but it’s been about a week since I did this job and the plugs are all dried up and not very attractive.
I thought I would breeze through this particular project. In actuality, it took longer than expected. First, I dethatched the grass. I did this by towing the dethatcher I bought at Home Depot around the yard. Since grass and thatch kept clumping up in the tines, I had to stop frequently to clean it out. After that was done, I put the bagger back on the mower and mowed the grass at a height of three inches. I know the general advice is to mow at one inch or less when overseeding, but I just didn’t have the heart to scrape the dirt when I had no guarantee of rain in the future. I am not about to water 11,000 square feet of grass either. Mother Nature is going to have to take care of this one.
After I dethatched and mowed, I pulled out the tow behind plug aerator and did my thing. I did a few passes over the lawn to make sure I roughed up the dirt enough. I did a good job, but I still think I should have done more. It’s just that while doing this kind of thing, you want to get it done. Driving around in circles isn’t all that entertaining.
Okay, so once the aerating was finished, I filled the seed spreader up with my custom mixture of Kentucky Bluegrass and Perennial Ryegrass. I chose these two types of grass because the Kentucky Bluegrass is just awesome looking and it is supposed to spread to fill in bare spots. The thing is, it takes forever to germinate. The Perennial Ryegrass is a good looking durable grass that germinates much faster and will fill things in while waiting for the Bluegrass.
As I said above, it’s been about a week with no rain and there isn’t much action out there. I have been watering certain areas with my sprinkler because I have no illusions that a huge thunderstorm isn’t going to come and wash all the seed off the front hillside. I want to get that grass sort of anchored in there before that happens. Otherwise, I will have to let nature take its course and wait for the grass to grow on it’s own. I also have some seed left over to spread out if need be.
Here are some pictures for you.
-
-
Bare spot in lawn with hole from tow behind plug aerator
-
-
Bare spot in lawn with Kentucky Bluegrass and Perennial Ryegrass grass seed
-
-
Bag of Scotts starter fertilizer
Oh yeah, I also bought two bags of Scotts starter fertilizer. Each bag is supposed to cover 5,000 square feet. I haven’t applied this yet because the directions say to water in immediately after application. Since I can’t water the entire lawn, I am going to wait for right before the next rainfall to spread this stuff around.
Related posts
Tuesday, January 27th, 2009
Okay, so listen to this. I received my Home Depot gift cards yesterday. I got a pretty decent amount’s worth. So basically, they have been burning a hole in my pocket ever since. So what did I do about it? Well, I ran over to Home Depot and picked up that RIGID 4 gallon wet/dry vac I was talking about. It’s going to be a big help during those “cleaning out the pellet stove” times.
RIGID 4 gallon wet/dry vac
Actually, I just cleaned out the pellet stove a few minutes ago. As I mentioned in a previous post, I was worried about ruining our regular house vacuum by sucking up ashes from the pellet stove. I mean, it’s not like there is a huge amount of them. I do empty the ash pan first, but there are still some remaining ashes hanging around. Those need to be vacuumed. I tried using the dust pan and brush, but that doesn’t have the best results on the floor tile grout. The ash kind of gets smeared in there.
The reason I got the 4 gallon wet/dry vac is because is was the smallest size RIGID makes. The reason I got RIGID, is because I like the brand. I have had decent luck with their other products. Also, this vac has wheels on it, so I can roll it around when I am vacuuming out the car and stuff like that.
The only thing I am worried about is the ash clumping up in the filter. After I used the vacuum a few minutes ago, I did notice the filter got a bit dirty. I banged it against the side of the vacuum and the dirt pretty much fell off the filter. I figure this is bound to happen with any type of vacuum I use, so I might as well use a wet/dry vac. Also, once the filter has been banged around for its last time, I can always pick up a replacement.
Now that I used up a little less than half of my gift cards, I think I am going to hold on to them until Home Depot starts selling trees and shrubs again. Then, I can head over there and go on a shopping spree.
Related posts
Friday, January 23rd, 2009
Internet Population Passes One Billion; Top 15 Countries
The number of people on the Internet surpassed one billion in December, according to comScore. The actual number is probably higher than that (Internet World Stats counted nearly 1.5 billion Web surfers worldwide as of June 30, 2008). In any case, only between 15 and 22 percent of the world’s population is on the Internet. We have a long way to go.
Climate Change Killing America’s Trees at Ever Faster Rates
Trees in western North America are dying at faster and faster rates, and climate change is likely to blame. The mounting deaths could fundamentally transform Western forests because tree reproduction hasn’t increased to offset losses, according to a new study published Thursday in Science.
More Spaceflight Needed To Drive Evolution
There is fierce debate over the direction humanity should take when exploring the solar system. Plans for human exploration of the solar system and beyond often polarize opinions among the public and scientific communities.
Want to Live Longer? Cut the Pollution
Nobody pretends that polluted air isn’t terrible for your health. Clean up the skies over any dirty city and the people who live there will all but certainly become healthier. That, at least, has been popular wisdom, but until now, no one had ever put it to the statistical test. Now someone has and the results are striking.
Mars and Mercury Formed From Planetary Scraps
Mars and Mercury were formed from the scraps of Earth and Venus, according to a radical new theory of rocky planet formation. The model could explain some characteristics of Mars and Mercury that have long puzzled scientists, said Brad Hansen, an astronomer at the University of California, Los Angeles.
Related posts
TYSM I read this one and decided to try it out on my ACER (See, its not always HP with the problems)...