Monday, September 7th, 2009
I have always wanted an under sink water filter. I’m not sure why, especially since we have a whole house filter. I guess it’s because the whole house filter is all the way down in the basement and I keep thinking the water gets all screwed up traveling through the pipes. I like the idea of having a filter close to the tap.
I decided that I had the capabilities to install an under sink water filter myself. I mean, I do have the brains and the patience. It’s not really a hard job, just one that you have to psych yourself into doing because you have to clean out under the sink. You know…all those bottles of who knows what and cans of what the heck it this. Throw in a few old sponges and there you have it – the area below a kitchen sink.
There was one little issue that was in the way of me installing a water filter. The faucet we had installed on the kitchen sink was a bit out dated. It was one of those “one handle” ones that sits right in the middle. Some people prefer that style, but I always liked the two handle ones. In this case, the two handles are preferred because the water filter only runs on the cold line. I like knowing that when I turn on the cold water, only the cold water is running. So, I basically needed a water filter and a new kitchen faucet. Not a problem, I’m really cheap when it comes to kitchen faucets and the filter setup was only $34. It even came with the insert.
Off to Lowe’s I went. When I got there, I strolled down the filter aisle and picked out a “Whirlpool Drop in Filtration System – WHKF-DUF.” This is the $34 jobber I just told you about. I knew what to expect because I already picked it out online. I put the filter in the cart and went over to the next aisle that had all the faucets. There they were, all lined up on the wall. I knew I wanted the chrome Peerless for around $44, but I was forced to get the $68 model because we have a four hole sink. That means that we have that extra little sprayer. You know, the one that you can wrap a rubber band around and sit back in its holder. When someone comes by to turn on the sink, they get sprayed. Yeah, that one.
I picked up the model I needed and put it in my cart. Or what I thought was my cart.
Here’s a funny little story. When I rolled my cart into the faucet aisle, I saw a nice family standing there trying to pick out a kitchen faucet. I noticed that they were kind of just randomly picking things out and didn’t know why. There are differentiating factors in faucets such as the one handle or two that I spoke of above. Also, there is the height of the faucet end. Our old faucet was low, so when I tried to get a large pot filled with water, I had to angle it such a way. Anyway, I broke the ice by saying, “Boy, I feel like I’m part of the family.” They laughed and I laughed. The father just looked at me. There were three of them…the mother, the father and the daughter. Okay, on with the story. I told them about the height issue and why and they were just amazed. As far as I was concerned, they thought I was the cat’s meow. I left the aisle to go out to the garden center.
When I got out to the garden center, I picked out two trees and put them into the cart. I stood back and looked at the faucet. Then, I wondered where the filter was. For the first time in my life, I grabbed the wrong cart. I think it was the faucet aisle family’s cart that I had taken. I left the cart outside in the garden area (because I already had the trees in it) and walked back into the faucet aisle. There it was, my cart with the filter in it. I felt bad for the poor family that had to walk away with no cart, carrying the faucet in their hands. They probably thought I was just fluffing them up earlier so I could steal their cart.
Okay, story time is over. Here are some pictures of the kitchen faucet and under sink water filter installation.
-
-
Under kitchen sink looking up at botton of old faucet
-
-
Under kitchen sink looking at hot and cold plumbing pipes
-
-
Top of sink with old faucet removed
-
-
Under sink with old faucet removed
-
-
New Peerless kitchen faucet installed
-
-
Whirlpool under sink water filter installed
-
-
Peerless kitchen faucet box
-
-
Peerless kitchen faucet model P99587-D
-
-
Whirlpool under sink water model WHKF-DUF
Everything works great and the installation took me about an hour and a half.
I have always wondered why there is such a big price difference between faucets, and doorknobs for that matter. Either I have never used a really high quality faucet or doorknob or I am just missing something. Every time I go shopping for either, I always get the cheapest available and find that they work just great. Maybe I am missing something. Perhaps someone can enlighten me.
Related posts
Tuesday, February 24th, 2009
I knew I was on to something. It’s like I can foresee the future; it’s a gift.
I came across an article this morning that talks about how social websites can actually harm the brains of youngsters. Can you believe it? I’m just glad I got out when I did.
You can read the article here. You have to read the whole thing to get to the juice.
My advice? Run while you can.
Related posts
Wednesday, January 28th, 2009
I spoke to an old friend last night on the telephone. We chatted about all kinds of stuff, including the economy, the world in general and the stock market. Now, I have known this person for many years and thought I knew what he was all about. Last night’s conversation revealed that I wasn’t aware of nearly as much as I thought I was.
As it turns out, my old friend knows quite a bit about the stock market and is very enthusiastic about his knowledge. Now, you know me…I’m always ready to listen and discuss the world of high finance. We had a grand old conversation about the various types of stock indicators. The funny thing is, as much as I have heard about all the different types of tools my trading account offers, I really had no idea what any of them did. Last night’s conversation peaked my interest.
For a long time, I have had a suspicion that people were getting rich off of this stock market. I always knew that by setting “buy” and “sell” triggers, you can basically set your purchasing and sales on auto-drive. Whether or not that’s true, is debatable. I suppose that if it were true, everyone on earth would just take a class on how to set triggers and we would all be rich. Now I know that by analyzing stock indicators, you can get a much better picture of how to analyze past performance of a stock to predict its future movements. The problem is that our predictions are oftentimes so wrong, that we lose money.
If you have the time, the brains and the patience, I believe that you can study stock indicators and how to set triggers and make money in this stock market. There are some conditions that would have to be met first (in my opinion). They are: you would really need the time (all day), the money (and the willingness to lose it) and the intellect (to realize what exactly you are doing). I suspect that many people would get excited about learning about this type of thing and jump in to the market being a bit green. That basically describes me. The good part about how I roll is that I know what I am good at and what I’m not. I tend to stick with things that don’t offer very many negatives. I am a very patient man.
I suppose my point for this post is that we can all make money in this economy if we put out minds to it. If you are a stock market wizard and care to share your success stories, you can leave a comment on this post. I am sure you would have an audience of very interested readers.
By the way, if you would like a short description of stock indicators, you can visit this page. If you would like to delve into what each technical indicator does or its definition, you can visit this page.
Related posts
Wednesday, September 26th, 2007
I actually read quite a bit last night. I don’t know…I guess I was inspired. My frontal lobe is getting a workout and, believe it or not, I feel better.
I am almost done with “Wobegon Boy” by Garrison Keillor. Let me tell you, this book had good reviews. Even what they said on the back cover was good. HAHA, what they say on the back cover is always good. When I first started reading this book, I was having fun. The story made sense and all was nice in the world. I think, about half way through, when “John’s” father died, things got a little weird. To me, the story lost track. It seems like Garrison is almost just trying to get all the punch lines he had in his head for all these years on paper. It almost doesn’t make sense. I have to admit that I have been only reading a few pages each night, but it is hard to get back into the story when I do decide to pick up the book again.
Have you ever read, “It” by Stephen King? That book is kind of fat. That is, “thick,” not “phat” with a PH. I think I got about half way through it when I looked deep into my soul and told myself I had absolutely no idea what this man was talking about. I was slightly sad about that because Stephen Kind is so famous and I really tried to enjoy his writing. I had to put the book down forever. Now, I am not saying that what I write makes any sense either, but then again, I am no author. All I can claim is that I am an amateur blogging hack.
So, back to the frontal lobe. Yeah, it feels better. It has been a while since I did anything educational-wise-ish and I miss it. I get so excited when there is something to learn. I have been very focused on business lately that I almost gave up on intellectual stimulation. The most I have done in the past year was to complain about my problem during dinner.
I can tell I am a new man. Can you believe that the whole transformation has happened in less than a week?
Related posts
Friday, September 22nd, 2006
This lesson was scheduled after work, because I used up my days off for the year. Good thing they renew tomorrow. I am going to start taking half days, so I can take my lessons at about 1PM. I think that would be the best time to fly. Mornings are good too because a nice lesson wakes me up.
I am a little razzled after work, so I needed to relax a little before getting in the plane. I needed to get in the zone. I was sitting on Freedom Air’s couch chillen like a villain when Yigal walked in. He was wondering why I wasn’t doing to pre-flight. Ok, getting in the zone…over.
I did the pre-flight and we taxied to runway 26, which threw me for a loop. It’s amazing how used to one runway and one pattern you become in such a short time. The wind was different today, so we had to mix things up. I learned that this was a right pattern runway as compared to runway 3’s left pattern. That threw me for a loop too.
Ok, taxiing done. Run-up done. Radio calls done. Takeoff number one was smooth. This lesson was to go over touch and goes again. Incidentally, touch and goes are a little taxing on the brain. There is a lot to do in a very short time. The pattern is not that far of a distance and there is not much altitude to play with. I made it a point today to use more of the rudder and to start using the horizon as a guide more than the instruments. This works much better and gets me more used to flying the plane like I am supposed to. Imagine driving a car with your nose stuck in the speedometer, gas gauge and turn signals. Not going to work well.
There were about 2-3 planes in the pattern today. There was a really nice Columbia up there with us. I found the new plane I want. This sucker cruises at 190MPH. There was another plane that came into the pattern later on from the left instead of the right. His radio call that he was entering the pattern on at a 45 concerned us a bit…because if that radio call was correct, he would be coming straight at us. Yigal took over at that moment and tried to find out where he was. We couldn’t find him at all. Apparently, since he thought it was a left pattern, he was all the way over on the other side of the runway. No wonder he was no where to be found. That’s why I like having a good instructor…it’s second nature for him.
Since there was a faster plane up there with us practicing touch and goes as well, we had to practice some slow flight waiting for him to do his thing. I am not a fan of slow flight…it’s ok, but you really have to keep your eye on the airplane’s pitch and speed. Too much pitch or too slow of a speed, the plane can stall and you will need to immediately recover. It keeps you extremely alert. We also practiced “crabbing” the airplane due to some wind coming from the North.
We made 4 landings and on our last one, Yigal asked if I remembered what to do if I lost the engine. I said I did. Of course his next move was to pull the throttle to idle. He said, “Land it.” I completed the proper steps and started my final approach. It is very difficult to maneuver in slow flight…so I had some difficulty. I pulled up the last click of flaps and slowed the plane down too much. Ok, that would’ve been a landing in the grass. Another note to self: keep your speed until you absolutely know you will make the runway. Yigal gave the airplane some throttle so we were further down the runway and I landed the plane.
I have to say, using the rudder more liberally improves my landings by giving me more maneuverability. Also, using the horizon as a guide lets me focus more on flying the airplane more comfortably. It feels like I “own” it more.
Related posts
TYSM I read this one and decided to try it out on my ACER (See, its not always HP with the problems)...