Archive for the ‘Home Improvement’ Category
Wednesday, December 31st, 2008
Many of you may have noticed that it’s winter. Yes, the good ‘ol freezing cold air is back. If you aren’t enjoying the air, maybe you’ll get a kick out of clothes that almost electrify you. I’m talking about static, folks. Yes, static.
I have these long Nike warm-up pants that I sometimes wear when I am playing tennis. They are pretty cool and crazy comfortable. I used to wear them in the summer sometimes until I realized that while they were cool looking, they weren’t all too cool on my legs. My legs are at the pinnacle of muscular perfection and insist on being able to breathe.
Since it started getting colder outside, I have been wearing my warm-up pants more often. I would wear them every time I play tennis, but I am being inhibited by one issue – static electricity.
I am not kidding when I tell you that I have shown up to the tennis club with these stupid pants completely stuck to my legs. I stand there laughing while I try to pull them away from me like that lady on the static commercial on TV. You know the one…she is grabbing at her skirt, trying to get it straight. Yeah, right. Good luck with that.
It gets even worse when I actually start playing tennis. For those of you who haven’t been to an indoor tennis facility, I’ll tell you that there is a very fine layer of “tennis ball dust” covering almost the entire floor. This dust is really the neon yellow fibers that come off the tennis ball when it is hit by a racquet. It doesn’t take a rocket scientist to figure out that all that tennis ball dust is eventually going to find its way onto my magnetic pants. It’s a wonder I still wear them at all. By the time I am finished playing, my pants are covered with yellow from my knees down.
Needless to say, I hate static.
I’ll tell you one more story before I get to the point.
I have this nice black zipper up fleece that I bought from L.L. Bean a few weeks ago. It’s a very handsome fleece and I really like it. Actually, I did like it until I washed it. You should have seen my eyes when I pulled this thing out of the dryer. Forget about the lint catcher, my fleece caught all the lint. The fleece is pretty much unwearable now. I don’t know what I am going to do about it.
To deal with this problem, I started looking at anti-static remedies online. I went through the traditional fabric softener and dryer sheet thing, but I didn’t think that would really work. There were a bunch of people out there that said they had no luck with dryer sheets on fleece. They said that nothing works. Not cool when you have three cats adding to the problem.
I also came across those reusable dryer balls. I think they are made of rubber or something. People said they had mixed emotions about them, but there was a consensus about putting tennis balls in the dryer with your clothes to reduce wrinkles and static. Since I have an ample supply of tennis balls, I decided to give it a shot.
Tennis balls in dryer
I did a few washes and dried the clothes with the tennis balls. Of course, Laura didn’t try this home remedy with her clothes. She lost faith in my laundry capabilities (and tips) long, long ago. Let’s just say there have been some issues. I believe I don’t need to explain any further, because anyone out there who lives with someone, surely knows of the damage one can cause in the laundry room. Especially, when that someone has an imagination like mine. Just look at me trying to blow snow with a backpack blower in the next post.
I have some good news and some bad news, and I’ll give you the bad news first. My fleece still has visable lint all over it, even when I washed it with only dark stuff. The good news is, the rest of the laundry is almost static free and virtually has no wrinkles. I used to have a wrinkle problem, but since I started using the tennis balls, no more wrinkles. I think that’s fabulous. Also, the rest of the clothes seem to be really lint free.
So, my conclusion is that tennis balls work in the dryer to help out with static reduction, wrinkle reduction and lint reduction. What works on a handsome black fleece? Who knows. If you know, trust me, my ears are open.
Related posts
Thursday, December 18th, 2008
I really didn’t want to make the call this morning, but the predicted snow for tomorrow is steadily creeping up on me.
If you remember back a few months, I told you that I had only one more thing to buy…a snowblower. I planned for it and expected to get it in October. Then, I started thinking about how I might be able to get away with using a shovel on the very long driveway. Laura and I even talked about it; she would use one shovel and I would use the other. This, of course, was a conversation that was had when it was 60 degrees outside.
The day before the snow storm (today), the conversation changed. It went something like this:
ME: I bought a snowblower.
HER: Oh really?
That was about it.
Why did I get it? I’ll tell you why. It’s because of that dreaded end of the driveway snow. Last night while lying in bed, I had terrible flashbacks of that deep pile of snow the road plows leave at the end of the driveway. That snow is the absolute worst to shovel. There is no way I want to go through that again. I did it all last year and it really stunk.
One time, at the old house, my neighbor graciously came over and used his snowblower on the end part of our driveway. Man, that thing kicked some serious a$$. I stood there like a fool watching him. That proved there was a better way to get rid of the snow than using that green plastic shovel I was clutching in my hand.
So what did I do? This morning, I got on the horn and called my good friend Matt down at D.H. Marvin & Son, Inc. in Colchester. This is the equipment dealer I bought the John Deere tractor from. I told him that I wasn’t pleased to be speaking to him, because I was about to give him my debit card numbers again. He gave me a chuckle.
About 2 hours later, Matt showed up in the driveway with this…
Ariens snow thrower
Ariens snow thrower
Ariens snow thrower
Home Depot sells the same model, for the same price. I don’t know why I would buy it from Home Depot if I could get the additional support from a local dealer at no extra cost.
This is a nice snowblower. It is 24 inches wide and even has electric start. I am going to use the pull start, but if I needed the electric, it’s there.
I started it up and drove it around a little bit. It’s fairly simple to use. I am now hoping that it snows tomorrow, because if it doesn’t, I am going to be kind of mad that I just spent all this money on another garage ornament.
Related posts
Monday, November 24th, 2008
As I mentioned earlier in the season, we had a St. Croix Prescott EXL pellet stove installed in the basement.
Before the Winter season really began, I had my doubts on whether or not the pellet stove would heat the entire house. I was worried that it’s location would hinder the airflow to all the rooms upstairs. Well, I am happy to inform you that the stove does heat the entire house. I mean, if we keep the master bedroom door shut, it does. The master bedroom is over the garage and the furthest room from the stove. It’s also the coldest room, which is why we keep the door shut. When the time hits 10:30PM, the new digital thermostat cranks the heat in that room up to 65 degrees. That’s good enough for me.
We have had some nights already where the temperature has been in the 20s. I think that’s Winter and enough to tell me that the heating situation is going to be okay. I did try burning a fire in the regular fireplace a few times while running the pellet stove. The fireplace actually made things worse. It sucked so much air out of the house, all the rooms dropped a few degrees. Fireplaces are remarkably inefficient and really shouldn’t be used, in my humble opinion. If you want to run something in your fireplace, run a free standing wood stove or a wood stove insert. Even burning a fireplace for aesthetics on a cold day will freeze out the rest of your house. Nuff said.
Okay, we are having a little issue with the pellet stove.
A few nights ago, I tried to start it up. The start up procedure really isn’t very difficult on the Prescott. It basically consists of pushing the “on” button. Once the “on” button is pushed, the room blower turns on for about 10 seconds and the auger turns until the burn pot is approximately half way full of pellets. As the auger is turning, the ignitor kicks on and the pellets light up. It’s fun to watch and I sit there almost every time I light the stove doing just that. I smile when I see that flame dancing around inside that pellet stove.
Back to a few nights ago…when I tried to light the stove this particular time, I pushed the button. The fan turned on for about 10 seconds and then the stove just shut off. I am not sure if the auger ever turned to drop pellets into the burn pot.
I tried to light the stove a few more times when I noticed the #2 light blinking on the control board. I thought this was a little strange, since I had never seen that light blink before. I pulled out the owner’s manual and looked up that error code. Apparently, a lack of negative pressure causes the stove not to light and the #2 light to blink.
What can cause a lack of negative pressure? Well, a really windy day can do it, an open pellet stove door, a fireplace burning upstairs perhaps, a clogged air feed pipe or a clogged exhaust vent pipe. I am sure there are others, but these are the ones I remember.
Since I had a fire already going upstairs in the fireplace, I chalked the whole thing up to that. I got the pellet stove going in this instance by pulling the rubber tube off the vacuum switch and lightly sucking on it. When I heard a little “click,” I pushed the on button again. From here, things were fine. I held the crimped hose for a few minutes and then I hooked it back up the proper way.
Well, I tried to light the stove again the next night. The same thing happened. Since we had no fire going in the fireplace, I thought perhaps there was a clogged area in the stove somewhere that is causing the lack of vacuum, or negative pressure.
Let’s make a really long and boring story a bit shorter and to the point.
I cleaned out the entire stove about 10 times and nothing has changed. Every night, I suck on that hose to get the stove up and running. I have been reading the owner’s manual as well as some websites that deal with this kind of situation, but nothing has helped. One website said that a clogged exhaust vent is the sure-fire problem. I got excited and took off the clean-out cap. A little pile of ashed dropped out, but nothing changed.
This afternoon, I called the pellet stove dealer. I told them that I had pretty much narrowed the problem down to a faulty pellet stove vacuum switch and that I would need the tech to come out and take a look. Before we swap out the switch, I want him to hook up a vacuum gauge to see if there is proper negative pressure. If there is, we can replace the switch…if not, we have to do a bit more digging.
I keep going downstairs to investigate this issue. It is in my blood that I try to diagnose this problem myself. The only things I don’t have are a vacuum gauge or a new vacuum switch. I guess I need those things to solve the problem.
If you have ever experienced something like this with your pellet stove, please let me know. I am racing against time here. I want to beat the repair guy and figure this out myself.
Related posts
Tuesday, November 18th, 2008
I think it’s finally finished.
I did the last big cleanup last week. The Oak leaves finally decided to fall so I had my work cut out for me. When the Oak leaves fall, the entire ground is basically covered. It’s much worse than when all the other leaves fall. Oak leaves are big and thick. They fill up the bagger very fast and have a tendency to clog the chute.
The way I got around the massive amounts of leaves clogging things up was to give the lawn a quick mow first. I lowered the cutting deck to 3 1/2 inches and ran over the grass a few times. This chopped up the leaves nice and fine. Then, I attached the bagger and went to town. Things still filled up fast, but I didn’t have to stop to dump nearly as often. Also, stopping the tractor to unclog the chute lessened as well.
The Scotts Lawn Service visits are over for this year as well. They came out 3 times, since I called them in October. The first time they came, they put down a slow-release fertilizer and a grub control. The second time they came out (just a few days ago), they put down a winterizer fertilizer. Yesterday, they came out and put down a dolomitic pelletized limestone. I have been waiting for this lime application because I think this is one of the major problems with the soil here. It will…
“…help balance the soil PH and contains calcium and magnesium for improved health of the grass plant.”
I got that from the invoice.
The grass actually is looking better already. I am impressed. There were a bunch of larger brown areas from all the junk grass dying from the cold, but those areas are now turning green. My little over-seeding episode that I performed a while ago helped, I’m sure. Oh yeah, I also aerated the lawn about a month ago too.
I am planning on the grass coming back with a vengeance in early Spring. The Scotts people said that I am most likely going to have to mow twice as much. That’s fine with me, now that I have the ride-on mower and the bagger. No more clumps of grass shooting out of the side making dead spots all over the place.
Ahhh, the life of a guy who thinks about grass way too much.
Related posts
Sunday, November 2nd, 2008
I made a vow a few years back. I vowed that I would never buy trees from Arbor Day again. Obviously, I didn’t have much luck with my first batch.
I think the problem with the last batch of trees was that I put them in planters over the Winter. They didn’t do well in them. The planters froze like big ice cubes and only one or two of the trees survived. Since then, I told myself that I was just going to buy the more established trees.
Well, as usual, I softened my stance on the subject. I thought about it a few days ago and decided to give another round a try. This time, I would plant the trees directly in their permanent homes right from the start. Since they ship the trees in the early part of November, the soil is still soft enough to get a shovel into.
Baby Blue Spruce
I became a member (again) at ArborDay.org. With membership, I got 10 free Blue Spruce trees. I then ordered 10 Norway Spruces. Yesterday, I received the Blue Spruces in the mail. I was pleasantly surprised at the health of them and immediately planted them along the edge of the lawn and the woods. Since the trees are less than a foot tall, I also put bamboo stakes next to each tree, so I don’t run them over with the mower.
I have yet to receive the Norway Spruces, but since I liked what I saw with the first batch, I decided to order 10 more Norway Spruces. That will be 20 in all. I am going to spread them in between the Blue Spruces towards the front and side of the property. In about 10 years, we should start to see some growth.
Related posts
Monday, October 27th, 2008
I think that’s a myth. There’s no such thing. I’m sure people go out to do a big cleanup every Autumn…you know the kind, when the kids jump in the huge piles of leaves, but it’s unrealistic to think that you don’t have to keep cleaning all season long.
I have already done two big cleanups. Each time, I blew out all the gardens, I mowed the lawn and sucked up all the leaves. I also got up all the twigs off the grass. I am betting that I have to do this at least one more time, if I want to get things really clean.
You know, I guess I can just forget about the whole thing and wait until Spring. That would be a problem because, besides having the place look bad, trying to get wet leaves up the Spring time is a much more difficult task.
All I have to say is I love you Stihl and John Deere. If I didn’t have this blower and ride-on mower with the bagger, I would be up…well, in a very annoying position. I couldn’t imagine trying to rake this entire yard and then mow it with the push mower. I suppose I could do it, but I really wouldn’t be doing too much else in life because of the time it would take.
Can a guy get grass obsessed?
Grass
I believe so.
Hey, I’m not the only one out there who cares about the grass so much. Do you know how much money people spend on lawn care every year? A whole lot, that’s how much. Those nice even green lawns don’t come cheap. The trick is to get them even and green in the first place. Keeping them that way is the easy part. When you’re just a novice like I am, the learning curve can be kind of steep. My main problem was identifying the problem. Now that I know what’s going on, I can correct it. The bad part is that it’s probably going to take until next Autumn to get things looking good. That makes for a very long Spring and Summer for a guy who sits on the front steps looking at the grass.
You really should see it though. When I am done driving around like a crazy man sucking up those leaves, the whole place looks like I just vacuumed it. It’s so cool. I get such a kick out of these toys.
Even my brother got a nice back-pack blower. He couldn’t deal with his 10 year old Craftsman hand-held, so he went out and got a big one. He told me just last night that he got done in 5 minutes what would have taken an hour with the other one, if it did the job at all. Hey, when you have a lot of leaves…
Sky at dusk
I know why people say that Autumn is their favorite time of year. It is simply spectacular. Even when many of the leaves are already off the trees, nothing beats a nice warm Autumn day.
We have been doing a lot of hiking and walking. Sometimes, I just stop in the middle of the trail and smell the air. There are only certain times of the year we can do this and I like to enjoy it. There is nothing like it.
Related posts
Saturday, October 25th, 2008
After I came back from playing tennis this morning, I moseyed around just finishing up some stuff that needed to get done.
First and foremost, I had to make a new batch of beer. I am almost out of my current beer (Irish Stout). It will be horrific if I run out. I ordered the ingredients for my new batch a few weeks ago. This time, I am not messing around. I mixed things up a bit with a new recipe. Here’s what I did…I went ahead and did my thing with the original recipe. I added what I needed to add and stirred when the directions told me to stir. This time, instead of just sealing up the big jug and waiting for it to ferment, I decided to brew a pot of decaf coffee and pour it in with the rest of the mixture. I also added 100 grams of cocoa powder. When I was finished mixing everything together, I took a big smell. It was like I had my nose in a huge wine glass. Ahhhhh, the aroma of chocolate coffee stout in the making.
Now, all I need to do is to find somewhere in this house that remains between 70 and 80 degrees. Yeah right. Like there is anyplace that hot here. I think I am going to store the beer downstairs, because that is the most heated area of the house. Even if the temperature goes up and down, I think it will be ok.
Beer kit thermometer
Today, I also made another batch of ice cream. I decided to make traditional vanilla bean, because I haven’t made a real smooth one yet. I am very proud of myself because this batch came out very well. I believe that if you tried it, you would give me a hug. It’s intoxicating.
Later on, Laura and I went outside to hang the Halloween lights around the door and to trim the Lilac bushes in front of the house. She did most of the lights and I did all of the Lilac trimming.
Rob, just in case you were wondering, this is what I was doing when you called.
I’ll take a picture of the Halloween lights another day. It’s pretty windy outside right now and I might blow away.
Since it was a great “working outside” afternoon, Holly the dog decided to join us. I tapped a metal stake into the ground and put her leash around it. Laura took a bunch of pictures of her and I wanted to show you the one where she (Holly) looks the most buff.
Holly the dog - Norwegian Elkhound
Doesn’t she look like such a punk?
Related posts
Tuesday, October 21st, 2008
We had a pretty fun night last night.
Initially, we planned to make a quick trip up to Bob’s Discount Furniture in Manchester. We need a whole lot of furniture. We need to furnish the entire bedroom, dining room, living room, my office and some odds and ends elsewhere. Needless to say, this is going to be tough.
If there is one thing in life I am cheap about, it’s furniture. I have no idea why. Perhaps because it’s not screaming “necessity” out at me. I mean, what’s wrong with sitting on an up side down bucket? Ahh, history. It’s not in my nature to go spend thousands of dollars on something that is just going to sit there. It’s not like a couch is going to help mow the lawn or a coffee table is going to clean the gutters. Geez, furniture is one of those things that looks good, but doesn’t do too much else. I need some sort of purpose with the stuff I buy.
Regardless, it needs to be done.
We drove up to Manchester to visit Bob’s. This is one of their larger stores with a whole “used” and “damaged” area in the back. There is furniture galore back there. It has dings, dents, cracks and anything else you can think of. The place is huge. The whole front area is reserved for the brand new furniture.
We walked in and were presented with a nice bedroom set. I liked it, Laura kind of liked it. As we walked on, we saw some things that she liked and some that I liked, and vice-versa. I am not sure we were in agreement, but we probably could have been if we stayed longer.
As we walked around, I noticed a candy station. I walked over to it and started eating the caramel chews. I don’t know what was wrong with me. I put some in my mouth and then shoved some in my pocket. I then took some other candy and stuck it in my pocket. I am not sure who was controlling me, because I certainly don’t eat candy like an idiot (which I was at the moment). Laura was looking at me in disgust. She had a look on her face like, “Give me the keys, you are being abandoned.”
Upon discussion, we decided that we would leave Bob’s. Nothing really jumped out at me. I mean, it’s a great place for couches and stuff, so we’ll go back for that. We’ll get a few couches and maybe a Bob-O-Pedic matress set.
We got back in the car and decided to head over to Raymour and Flanigan furniture. I have always heard good things about this store. We were nearby, so there wasn’t much deciding to do…the only factor was that we were now in the middle of rush hour and I hate cars. Whatever.
We walked in Raymour and Flanigan and were greeted by a nice sales lady. It kind of reminded me of a used car lot. I still had caramel chews in my mouth, so I couldn’t really talk. She started laughing at my grossness. When I was ready, I asked if their furniture was solid hardwood. She replied that it was, but there were a few pieces in the back that we should steer clear of. OK, fine. That’s fair.
We started walking around and I began noticing a strange trend…this furniture was obviously made by the same makers of Bob’s furniture. We saw many similarities, one not being the price. It seemed that they tacked on a few thousand dollars and upped the quality slightly, but it appeared that whoever made Bob’s furniture made this as well. I may be wrong, but that’s the way it looked.
You should have seen me, I was under the tables trying to see if they were made of real wood, pulling out drawers to see what kind of runners were used, wiggling things back and forth, checking the quality. Things were just OK. If I had to choose between the two, I would head back to Bob’s and save some money. I think both places offered similar furniture that would last about the same amount of time. This, of course, is my very uninformed opinion.
Laura and I looked at each other and decided to wash our hands of both places. We knew of one place that really makes us drool…Pottery Barn up at Evergreen Walk. Now, that’s what I’m talkin’ bout.
We walked in and picked out a bedroom set. Yup, it was that easy. It’s the Hudson Collection that can be seen here. We already knew the quality of furniture that Pottery Barn sells and really didn’t need to inspect it. Every time we go in this place, we look at the stuff, so it was really easy. The only problem is that the Pottery Barn furniture prices are in a whole different realm than the other two places.
OK, moving on. The end of the year is coming and I need office furniture. We walked to the back of the store and I picked out a nice little item called the “Rhys Console Table.” This is a perfect little place to put my fax machine and printer. Also, I can use the drawers for random things that are currently sitting on the floor.
Rhys Console Table
Then, we looked through the catalog and found a nice desk called the “Aris Large Desk.” I have had my eye on this for some time. We bought the console table and are having it delivered. I had to wait to order the desk online, because that’s an internet only item. I did that last night. They are going to deliver that in a few weeks.
Now, all I need is maybe some sort of shelving unit and a chair. That’s it for the office.
We were pooped from furniture shopping, so we left.
I have been meaning to stop by L.L.Bean to grab some more waffle shirts. I have two that everyone already makes fun of. One of them is salmon colored and has a picture of a salmon on it. Since I am a trendsetter, I ignore this fun poked in my direction.
As we were walking to the car, I asked Laura if she wanted to go to L.L.Bean for a few minutes. I mean, it was right in front of us. What the heck, we went to the store.
Hey, wouldn’t you know it, they didn’t have any waffle shirts. What they did have is some awesome “Corduroys”, some really cool “Two-Layer River Driver’s Shirts” and a really marvelous “Merino Wool Sherpa Sweater” that I have been looking to buy for about 10 years now. Oh yeah, I also picked up this amazing black “Fitness Fleece Jacket” that was calling my name too. Don’t you like my use of attributive adjectives?
Boy, what a night. At least I learned a lesson from all this…which is…I need an SUV. I am sick of paying for shipping.
Related posts
Sunday, October 19th, 2008
As I mentioned in one of my previous posts, lawn aeration was on my list of things to do. I think I mentioned that I was going to purchase a plug aerator next Autumn. Well, as with many things I say I am going to do in the future, this got done a little faster than expected.
The reason I couldn’t help myself was the great deal I got on the aerator. I checked a few places online and kept coming up with the same price everywhere. Then, I found the same aerator that everyone else was selling, over at Ace Hardware for less than half the price. I called the local Ace and had them order it for me. The guy told me the reason for the cheap price was that the warehouse was discontinuing them.
I was a little surprised when the hardware guy rolled the aerator out in a box. I wasn’t aware that I was going to have to assemble the thing. I mean, how many parts could there actually be?
Lawn plug aerator parts
It doesn’t look like too many parts, but all the small ones are in the small boxes. It took about an hour and a half to put together. This was one of those projects where, if I didn’t have the instructions, I would still be working on it. It wasn’t a difficult job, just methodical.
Lawn plug aerator
The unit looks very good when it’s all together. I was pretty excited to hook it up to the tractor, because I like attachments. I also wanted to see all those little plugs of dirt get spit out by this little contraption.
John Deere X300 and a tow behind lawn plug aerator
In order for the machine to operate correctly, it needs some weight on top of it. I used about 10 one foot by one foot pavers and some bungee cords for this.
The aerator works great, but is a little clunky when in action. I didn’t expect the bounciness of it. I guess that is the way it has to be…it’s riding on 24 tines, getting thrown all over the place. It made a whole heck of a lot of holes about 2 1/2 inches deep. You can’t really see the plugs because the grass is not that short. If I cut it short, you would see them.
Next up, lime treatment and winterizer fertilizer.
Related posts
Monday, October 13th, 2008
I must say, it really is.
I was driving up to Manchester this afternoon when I noticed how brilliant the trees looked. It’s mostly the Maples, Birches and Hickorys. Their leaves are really getting bright. I see mostly orange, red and yellow. The Oaks are still green.
After I got back, I took a little stroll up the driveway. I even took a few pictures for you.
Looking up driveway
Colorful trees across the street
Colorful trees in the woods
Now, those are some pretty leaves, right?
Ok, I will admit the nice leaves aren’t the only reason I am writing this post. The new pile of fire wood is.
For the past few days, I have been working to build a new pile of fire wood. I took three piles out from under the porch and moved them next to my other pile, out in the sunshine. Having the wood stacked under the porch wasn’t doing it any favors in the way of drying out. I compared the older fire wood that was under the porch to the newer (greener) fire wood that was stacked outside and the outside wood was much dryer. I also took down an Oak tree to add to the pile.
Fire wood piles
I know, I know, I did a lousy job at stacking the right side, but it was a bit tricky. Part of the tree wasn’t available to go right up against because the other pile was there. I did my best.
I really like the wood when it’s split, no matter how small it is. It dries faster and burns better. The only problem is my ax. It is too big. It’s more like a maul than an ax. It is quite heavy and better for splitting larger pieces of wood with a full swing.
With this in mind, I went out and grabbed a thinner ax. Something that will slice right through the smaller pieces of Maple, Hickory, Birch and Oak. Here is my new ax…
Ax with fiberglass handle
You might notice that I have already used it a few times. These things get beat up pretty fast.
Well, there you have it…my morning events.
Related posts
